In this post, we will provide Wowoto projector troubleshooting solutions and related FAQs, helping you to solve the problem and use the projector as usual.
In this part, Wowoto Projector’s signal, start, remote failure, blurry image, and overheating will be explained.
If the Wowoto projector shows no signal, you can check the following aspects.
If all solutions above don’t work, the remote control may be broken. You can contact the seller for remote replacement or buy a universal projector remote control.
You need to adjust the focus when you use the projector for the first time or move the projector.
The projection image should be within the screen size range. If the projection image is too big, the image will become blurry. For example, if the screen size range of the Wowoto projector is 60-120 inches, then the image should no bigger than 120 inches.
The projector’s lens may be dirty and you need to clean it.
Make sure the resolution of the source video is supported on the projector.
The ambient light can’t be too strong. Try to lower the ambient light to improve the viewing effect.
You can also choose a screen to improve the image.
You may be interested in Gray or White Projector Screen.
It is normal for a projector to produce heat, but you can check the following tips to avoid the problem.
There are two methods to connect the projector to iPhone. You can choose either a wireless connection or a wired connection.
1. Power on the Wowoto projector and enter iOS cast/screen mirroring.
2. Connect the Wowoto projector to Wi-Fi.
3. Connect your iPhone to the same Wi-Fi network as the projector.
4. Tap the screen mirroring function on your iPhone, then your iPhone will scan available devices automatically.
5. Select the signal of the Wowoto projector to connect.
6. The screen of your iPhone will be mirrored onto the projector screen.
If your Wowoto projector has no Wi-Fi function, you can use a wired connection. Follow the steps below to connect the projector and your iPhone in a wired way. Compared with a wireless connection, the wired projection is much more stable and smoother.
1. Turn on the Wowoto projector and enter the Input Source.
2. Select HDMI as the input source.
3. Fetch your lightning to HDMI adapter.
4. Plug the HDMI end into the projector and the lightning end into your iPhone.
5. When the two devices are well connected, your iPhone will prompt a message to ask for access.
6. Tap the Trust button to allow the projector to access your projector.
7. Then, the projector and your iPhone can be connected.
1. Turn on the Wowoto projector.
2. Enter Home Screen and select Wi-Fi.
3. Turn the Wi-Fi switch ON to turn on Wi-Fi, then the projector will scan available devices nearby.
4. Select your Wi-Fi signal in the list.
5. Input the password using the remote control when there is a virtual keyboard on the screen.
6. Select “Connect”, then the Wi-Fi is connected.
1. Turn on the projector and enter the homepage.
2. Enter the Setting and select system settings.
3. Choose Recovery.
4. Press Ok to reset the Wowoto to factory default settings.
That’s all for the Wowoto projector troubleshooting and related FAQs. To know more about projector tips, please refer to the projector buying guide.
Related Posts
Optoma Projector Troubleshooting