Some Nebula Capsule users can’t power on their projectors. This post will give solutions to this problem.
Firstly, you should make sure that you turn on the Nebula Capsule by pressing the “power” button on the projector for 3-5 seconds.
You should charge your Nebula Capsule with the wall charger and cable and see if the “NEBULA” logo on the top of your Capsule lights up.
If it does not light up, please try using another working QC charger (make sure the charger is capable of providing at least 9V/2A) and cable to try it again.
Then, you can hold down the “power” button on the top of your Capsule for 10 seconds to reset, and then press the “power” button for 3-5 seconds again.
If your Nebula Capsule can’t be charged, try the following tips.
1. Check whether the indicator light on the adapter is on. If the light is off, try using another QC 3.0 charger and cable.
2. If the light is on, keep the power adapter plugged in for more than an hour and then power on the projector.
3. Press the power button on the top cover for 10 seconds to reset the projector.
