AAXA P7 projector
If your AAXA P7 projector is unable to charge or can’t turn on, you can check or try the following solutions.
1. First check the power adapter is working by ensuring it is securely plugged in where the cord goes into the brick and where the plug goes into the outlet. Try testing with other power outlets to see if the power adapter is working correctly.
2. If there is nothing wrong with the power adapter, and your AAXA P7 has an internal battery, go to the projector and see if the charging light indicator is on. Please note for the projector to charge properly, you must have the projector turned off and plugged in.
3. Try to turn the AAXA P7 projector on via the On/Off switch on the side of the projector and see if the lights on the top of the projector turn blue. The projector will automatically turn on if the switch is on the “ON” position; if not, try pressing the power button on the remote to refresh the projector from the STANDBY mode.
4. If the projector shows no signs of power, then the power adapter must be defective. You can replace it if you are under our one-year warranty at no cost.
5. If you have tried all the steps above and don’t work. You can contact AAXA Technical Support via email at info@aaxatech.com.