If you come across an image problem when using VANKYO projectors, you can try the following solutions for troubleshooting.
Blurry Images or Out of Shape
Adjust the focus ring near the lens on the projector by moving it leftward/rightward till it shows the best images.
Adjust the keystone rotary knob and kickstand on the bottom of the projector to get the best images.
Place projector on flat surface horizontally or vertically. The inclination of any angle may result in blurry displays or uneven colors.
A darker environment is suggested to achieve the best projecting performance.
Eligible distance of 1.2m-6m/4ft-20ft between the projector and projecting screen/wall. The best distance is 2m/6.5ft with a viewing size of 60-90inch.
The projecting wall or screen is blank clean of the white color is needed.
The Image is Up Side Down
Press the ‘FLIP’ button on the projector remote (based on a certain model) or enter Menu-Picture to flip the projection image accordingly. The projector supports front installation front/back projection, lifting installation front/back projection.
The Image is Not square
Make sure the projector is placed on a flat surface with a projector light in the middle of the screen.
Make sure the projector screen is placed horizontally.
Color Distortion
Make sure the video source has a fine resolution.
Adjust RGB by steps: menu-picture-color temperature, then select different modes and adjust the value accordingly. Reset projector to manufacturer setting by steps: menu-option-restore factory default.