You can not only connect the ViewSonic NH8 Projector to network by WiFi, but also connect it to network by LAN. This tip is going to show you the method of ViewSonic NH8 Projector LAN connection.
Steps to connect ViewSonic NH8 Projector to Network via LAN
Easily connect to wired internet and customize the connection.
Plug the RJ45 cable into the projector’s LAN port, then make sure the other end is plugged into the wired Internet number source.
Go to: Home > Settings > System Settings > Network > Wired Network
The IP can be configured automatically or manually. Select Manual to allow access to IP address, subnet mask, default network off and DNS servers.
Note: It is recommended to select Auto for Configure IP to let the system configure the network settings automatically.