This writting will introduces you some tips for Sharp/NEC PE506UL Projector Installation.
Tips for Installing the Sharp/NEC PE506UL Projector on table
When installing the projector, keep sufficient space around it, as described below. If not, the hot exhaust emitted from the projector may be taken back in.
Also, make sure no wind from an air-conditioner hits the projector. The projector’s heat control system may detect an abnormality (temperature error) and automatically shut off the power.
In the above figure, it is assumed that there is sufficient space above the projector. There is also an intake vent in the front. Leave about 10 cm or more space behind, and even more space for installing the cables.
Tips for Ceiling Installation of Sharp/NEC PE506UL
Do not install the projector in the following places. Attached substances such as oil, chemicals and moisture may cause deformation or cracks of the cabinet, corrosion of the metal parts, or malfunction.
• Outdoors and places with humid or dust.
• Places exposed to oil smoke or steam.
• Places where corrosive gases are generated.
Read more:
How to Connect Sharp PE456USL to Network?
Sharp PE456USL PC Connecting Guide
