Home Projectors

Samsung The Freestyle Projector Remote Control Guide

Before using the remote control of Samsung The Freestyle Projector, you need to pair it with the projector. This post will give a detailed guide about Samsung The Freestyle Projector Remote Control.

How to pair The Freestyle remote control?

When you turn on The Freestyle for the first time, the remote control will pair automatically. If the remote does not pair automatically, you can point it at the front of The Freestyle and press and hold the Return and Play/Pause buttons for three seconds while pointing at the front of the Freestyle.

How to Use the remote control?

Before using the projector, you can see the illustration below to know the function of different buttons.

How to charge The Freestyle remote?

The remote control is equipped with a USB-C charger charging port, enabling users to charge it directly with a USB cable.

You can easily know the battery capacity by the following path: Setting> General & Privacy > Power & Settings > Remote Control Battery Level.

Remote Control Using Tips

  • Keep the remote more than 0.6 inches (15.24 mm) from your face when using and speaking to Voice Assistant through the mic on the remote.
  • Use the Samsung Smart Remote less than 20 feet (6 m) from the Samsung The Freestyle projector. The usable distance may vary with the wireless environmental conditions.

Related Posts

How to Fix If Samsung The Freestyle Can’t Turn On?
Samsung The Freestyle Projector Factory Reset Guide
How to Use Samsung The Freestyle’s Bixby Voice Control?
Bluetooth vs IR Remote: Projector Remote Control Comparison & Troubleshooting