Nebula Capsule 3 Laser Projector Troubleshooting

In this guide, we will collect some common problems with Nebula Capsule 3 Laser projector and list some troubleshooting solutions.

Nebula Capsule 3 Laser Projector Troubleshooting

Nebula Capsule 3 Laser Projector No Signal

• Check the projector is selected as the correct input source.
• Use a different HDMI cable to see whether the HDMI cable is bad.
• Press and hold the projector to wake the projector from sleep mode.
• Disconnect from your projector and try connecting your device to your TV via HDMI.
• Adjust the HDMI output resolution/Hz of the connected device to match your projector.

Nebula Capsule 3 Laser Projector No Sound

• Switch between various projection modes to see if your projector can play sound.
• Tap the Volume Up button on top of your projector.
• Restore the default settings of the projector.  Go to Settings >Devices Preferences > Restart.
• In Projection Mode, connect your projector to an external Bluetooth speaker. Go to Settings > Remotes & Accessories > Add Accessory.
• Check whether the audio format is supported on this projector.

Nebula Capsule 3 Laser Projector Won’t Turn On

• The projector may be overheated, and you can restart the projector when it cools down.
• Its battery may be depleted, please charge the projector for 15-30 mins before restarting the projector.
• Check the power adapter and connection cable.

Nebula Capsule 3 Laser Projector Autofocus Failure

• Slightly move the projector or press and hold the autofocus button for 2 -3 seconds to trigger the autofocus.
• There may be software errors. You can reset the projector to factory default or update the firmware.
• Try to use the manual focus. Select Settings> Projector Settings> Focus Settings> Manual Focus Correction and then press the “left” and “right” buttons.

Related Posts

How to Control Nebula Capsule 3 Laser Projector with iPhone?

How to Watch Netflix on Nebula Capsule 3 Laser Projector?