Some Mooka projector users come across many problems when using the projector, including Mooka projector not working, Mooka projector Netflix failure, etc. In this guide, you can see some troubleshooting solutions and a user guide about the Mooka projectors, helping you to solve common problems and use the projector skillfully.
You will learn Mooka Troubleshooting solutions to problems such as not working problem, Netflix play failure, no sound, overheating, image problems, remote control problems, sync screen problems, and no signal in this section.
If you find the projector is not working. You can check the following solutions.
If the Mooka projector fails to play Netflix, you should check whether you are using screen mirroring. Nowadays, Netflix can’t support screen mirroring via smartphones anymore because of copyright protection.
In addition, most Mooka projectors don’t support Dolby Audio. You need to turn off Dolby Audio Digital when you connect the projector to a TV stick or other streaming devices.
Make sure the sound format is supported on the projector. When you watch videos on some streaming platforms, you may need to turn off some sound effects.
Make sure the projector is not muted. You can try to adjust the volume and see whether it works or not.
Check whether the projector is connected to an earphone.
If the Mooka projector is overheated, you should check the vents of the projector first. If the vents are blocked, clean them as soon as possible.
Do not cover the projector with cloth for decoration.
Do not place sundries near the vents of the projector as they may interrupt heat dissipation.
Remember to turn off the projector when you are not using the projector. It is recommended to turn off the projector every four hours.
If the projection image is blurry, you should check the ambient light, screen size, and the lens module. If the ambient light is strong, you can close curtains to build a dark environment.
Regarding screen size, the projector can project clear images within its screen size range. Do not exceed the max screen size of the projector. You can also clean the lens to solve blurry images. See More About Causes for projector blurry images: Why is My Projector Blurry?
If the image is too small, you can move the projector farther from the screen. You can use the online projector calculator to calculate accurate data.
If the Mooka projector’s remote doesn’t work, just try the following solutions.
Firstly, make sure the remote has a sufficient battery. If the battery runs out, you can replace a new pair of batteries for the projector.
Keep a proper distance between the projector and the remote.
Point the remote control to the IR receiver to avoid an ineffective signal.
The strong fluorescent light should be avoided when using the remote.
If the projector is stuck when you sync the screen from a smartphone, you can try the following methods.
You can try to lower the output resolution when you are syncing a screen from an App.
Improve the speed of the Wi-Fi network.
If you are using a wireless screen mirroring, you can change to a wired mirroring as it is more stable than the wireless method.
If the projector shows no signal, you can try the following solutions.
Make sure you have selected the right signal as the input source of the projector.
Unplug and re-plug the connection cable and try again.
In this part, you can know about setup tips, Wi-Fi connection, and iPhone connection.
All Mooka projectors on the market support Wi-Fi and you can follow the steps below to connect it to Wi-Fi.
1. Connect the Mooka projector to home Wi-Fi.
2. Go to “Settings” then “Screen Mirroring” and find “iOS Screen”.
3. Connect your iPhone to the same Wi-Fi as the projector.
4. Turn on the “Screen Mirroring” function on your iPhone, select the “MOOKA-XXXX” projector and connect it.
5. Then the projector and your iPhone are connected. The screen of your iPhone can be seen on the projector’s screen.
(1) USB Connection
(2) HDMI Connection
Related Posts