Turn on the computer or video equipment you want to use after you turn on the projector.
Turning On the Projector
Connect the power cord to the projector’s power inlet and plug it into an electrical outlet.
- The projector enters standby mode. This indicates that the projector is receiving power, but is not yet turned on.
- Press the power button on the projector or the [On] button on the remote control to turn on the projector. The lens shutter opens and the status indicator flashes blue as the projector warms up. Once the projector is warmed up, the status indicator stops flashing and turns blue.
Turn off the projector after use.
- Press the power button on the projector or the [Standby] button on the remote control. The projector displays a shutdown confirmation screen.
- Press the power button on the projector or the [Standby] button on the remote control again. (To leave it on, press any other button.) The light source turns off, the lens shutter closes, and the status indicator turns off.
- To transport or store the projector, make sure all of the indicators on the projector are off, and then unplug the power cord.
Read more:
Epson EH-LS12000B Projector Remote Installing Tip
Epson CH-LS12000B HDMI Port Connection Tip
When you are watching the Epson EH-LS12000B projector, there is no image display on the screen, what is the solution? Check out this guide.
How to Fix if Epson Projector Has No Image
Try the following if you do not see a projected image.
• Turn on the connected computer or video device.
• Change the screen output from the computer when using a laptop computer.
• Insert a DVD or other video media, and press play (if necessary).
• Press the [Source] button on the projector.
• Press the button for the desired video source on the remote control.
In this case, you can troubleshoot the issue of Epson EH-LS12000B Projector has no image via the steps above.
Read more:
Epson EH-LS12000B Projector Remote Installing Tip
