To set up your Epson EB-PU1008W projector for monitoring and control using a Crestron Connected system, make sure your computer and projector are connected to the network.
Note: If you want to use the Crestron Connected system when the projector is turned off, you need to adjust the Standby Mode settings in the Extended menu.
Press the Menu button.
Select the Network menu and press Enter.
Select Network Configuration and press Enter.
Select the Others menu and press Enter.
Set the Crestron Connected setting to On to allow the projector to be detected.Note: Enabling Crestron Connected disables the Message Broadcasting feature in the Epson Projector Management software.
When you are finished selecting settings, select Complete and follow the on-screen instructions to save your settings and exit the menus.