When you bought a projector, in addition to know how to use it, it is also important to know how to keep it in good maintenance. This projector will introduce to you some tips for installing Cannon WUX5800 projector.
If the projector is abruptly taken to a warmer location, or if the room temperature rises abruptly, moisture in the air may condense on the lens or mirror and affect projected images. In this case, wait a while and make sure the moisture has evaporated before resuming use.
Do not install the projector in a location where the temperature is high or low. Doing so may cause a malfunction.
Install the projector so that it is not tilted left or right by more than 10°. Failure to do so may shorten the lamp life or damage the lamp.
Do not block the air intake or exhaust vents. Blocking the vents may trap heat inside the Cannon WUX5800 projector , which may shorten the useful life of optical components or other parts and damage the projector.
Install the projector leaving at least 50 cm (1.6′) between air intake/exhaust vents and walls on each side of the projector. Leave a gap of at least 2 cm (0.8″) from the bottom of the projector. There is an air intake underneath the Cannon WUX5800 projector.