This projector is equipped with network function. You can manage and control the projector from a remote computer using a web browser when they are properly connected to the same local area network. This tip will introduce you some tips for Cannon LX-MU500Z Projector Lan settings.
Standby LAN: Allows the projector to provide the network function when it is in standby mode.
AMX Device Discovery: When this function is On, the projector can be detected by AMX controller.
DHCP: Select On if you are in a DHCP environment and Projector IP Address, Subnet Mask, Default Gateway, DNS Server settings will be automatically retrieved. Select Off if you are in a non-DHCP environment and make adjustments to below settings.
PJLink Certification: Prevents unauthorized connection to the projector via PJLink application. The default password is “admin”. After selecting On, you can change PJLink password. If you want to change PJLink Password, enter the current password. Press left , right button to select the digit and press down, up button to select from 0-9, A-Z, a-z or symbols. Press OK/IMAGE to confirm. Enter the new password and press OK/IMAGE to confirm.
Read more:
How to Use Tip for Using Cannon LX-MU500Z Projector BrilliantColor Feature
Cannon LX-MU500Z Projector D.Zoom Feature Tip
Cannon LX-MU500Z Projector Corner Adjustment Guide
Cannon WUX5800 Projector Marginal Focus Reseting Guide
How to Adjust Image for Tabletop or Floor Installation of Cannon WUX5800 Projector?
